Creating Patient Location and Patient Status information

Overview

The Patient Site Location field allows a user to select, track and communicate the physical location for a patient

• Examples of Patient Locations are: Waiting Room, Check In, Exam Room 1, Lab
• Organizations can name the patient locations however they wish and create as many as they need
• Organizations must assign their locations to Sites so that each Site sees only locations at that site. If a location is not assigned to a site it will not appear in the dropdown
  • Preferences name: Patient Site Location
  • UI name: Pat Loc
  • Dictionary name: Site Location (not Patient Location)
  • SSMT category: Site Location (not Patient Location)

The Patient Encounter Status field identifies the various statuses of a patient office visit.

• Examples of Status are: Arrived, No Show, Cancelled, Bumped, Departed
• Organizations can name the patient locations however they wish and create as many as they need but they cannot make inactive the status 'Departed' because it is used by the system
• Organizations must assign their statuses to Sites. A Status can be assigned to all sites, some sites or one site. If a status is not assigned to a site it will not appear in the dropdown
  • Preferences name: Patient Encounter Status
  • UI name: Status
  • Dictionary name: Encounter Status
  • SSMT category: Encounter Status

High Level Process for New or Upgrade

Locations, Statuses, and Sites can be collected prior test upgrade

1. Extract Site, Site Location and Encounter Status categories from SSMT
2. Paste Site Location and Encounter Status into BW
3. Client populates both tables
4. Load into test environment
5. Client validates in test
6. Load from test into live

Create Entries for Patient Location or Status - SSMT

Note: Entries can be edited or made inactive but cannot be removed from the dictionary. Have your Location, Status and Site information organized and validated before proceeding. Review the existing entries and decide if there are any you want to overwrite or make temporarily inactive.

1. Extract SSMT category 'Site' for reference
2. Extract SSMT category 'Site Location' or 'Encounter Status'
   • ! Do not select the 'Patient Location' category. This is used by the registration & scheduling interface to track inpatient location
   • 'Site Location' and 'Encounter Status' categories were added to SSMT later and are not in alphabetical order. They are near the bottom.
3. Paste into Build Workbook
4. To eliminate an existing entry replace the existing values with one of your new entries. If you have no new entry to replace it with, set 'Inactive' to 'Y'
5. Enter CODE: must be unique, 10 characters or less, start with Org mnemonic, example 'NWH_Rm1'
6. Enter MNEMONIC: match CODE exactly
7. Enter NAME: as it should appear in dropdown
8. Do not alter the value in SEQUENCE (?)
9. Enter SITE CODE: Must match entry in SITE dictionary exactly
10. Enter SITE NAME: Must match entry in SITE dictionary exactly
    • Example: New World Health has 2 sites North and South. Both sites have rooms 1-3. The Site Location table would need 6 entries, rooms 1-3 with site code and name for South and rooms 1-3 with site code and name for North.
11. Set 'Create New' value to Y for all entries to be created
12. If there are delivered or existing entries that need to be made temporarily inactive, set 'Inactive' to 'Y'
13. Do Not Load until you are certain of all your entries, spelling etc… Once loaded, entries can be edited or made inactive but cannot be removed from the dictionary.

Create Entries for Patient Location or Status - Manual

Note: Entries can be edited or made inactive but cannot be removed from the dictionary. Have your Location, Status and Site information organized and validated before proceeding. Review the existing entries and decide if there are any you want to overwrite or make temporarily inactive.

1. Log in to TouchWorks as a user with access to the TW Setup or TWAdmin VTB
2. Click on TW Setup or TWAdmin > Dictionaries
3. Click on the Dictionary drop down Menu and chose SITE LOCATION if you want to work with the 'Pat Loc' drop down or ENCOUNTER STATUS if you want to work with the 'Status' drop down.
   • ! Do not select the 'Patient Location' dictionary. This is used by the registration & scheduling interface to track inpatient location

   

   or

   

   

4. Click ADD and a new line will be created for you to add your entry.
5. To eliminate an existing entry replace the existing values with one of your new entries. If you have no new entry to replace it with, check the inactive box.
6. Enter CODE: must be unique, 10 characters or less, start with Org mnemonic, example 'NWH_Rm1' or 'NWH_Arr'
7. Enter MNEMONIC: match code exactly
8. Enter NAME: as it should appear in dropdown
9. If there are delivered or existing entries that need to be made temporarily inactive, Check 'Inactive'
   • The Status 'Departed' cannot be made inactive. It is used by the system
10. (What does enforced do? is it editable?)
11. Do Not SAVE until you are certain of all your entries, spelling etc… Once you hit SAVE, entries can be edited or made inactive but cannot be removed from the dictionary.

Assign Location or Status Entries to Site(s)

• Example: If New World Health has 3 Sites and the Site Location 'Playroom' was located at the Children's Clinic Site, I would want to assign Site Location 'Playroom' to the Children's Clinic Site only.

• If the entry I added applied to more than one Site, I would assign the newly loaded entry to those sites as well
• Only entries assigned to the same site as the user will be available in their drop down menu
• Even if an organization only has one site, all the entries still need to be assigned to that site
• An entry not assigned to any sites will not be visible in the dropdown

1. In the Site Location or Encounter Status Dictionary, highlight an entry
2. Click the SITE button to assign the entry to a site or sites
3. Highlight a site in the Available Sites pane
4. Click ADD to move it over to the ASSIGNED SITE pane
5. Click OK

   

Validate In UI

1. Log in as a user
2. A patient must be in context to see Pat Loc and Status values
3. The Pat Loc and Status values should be visible in Schedule/Daily and Provider Schedules
4. The Pat Loc and Status values should be editable in the Clinical Toolbar and the Encounter Summary
5. All the entries assigned to the user's assigned site should be visible in the dropdowns

Set Preferences

If the new entries didn’t appear in the drop down menus, it may be that the preference settings needs to be turned on.

1. Log in to TouchWorks as a user with access to the TW Setup VTB
2. Click on TW Setup > Preferences
3. Set 'Patient Tracking – Use Patient Site Location' to Y
4. Set 'Patient Tracking – Use Patient Encounter Status' to Y

   File:99999.jpg

Removing Entries from the drop down menus.

If for any reason you want to remove an entry from the drop down menu, you must inactivate it, it cannot be deleted. This Inactive box works as a toggle switch so if you want to add the entry back to the drop down menu at any time simply follow the below directions and remove the check mark from the Inactive box.

1. Log in to TouchWorks as a user with access to the TW Setup or TWAdmin VTB
2. Click on TW Setup or TWAdmin > Dictionaries
3. Click on the Dictionary drop down Menu and chose 'Site Location' or 'Encounter Status'.
4. Scroll down to the entry you wish to remove and check the INACTIVE box.
5. Click Save
6. To put it back into the drop down menu, remove the check from the INACTIVE box.
7. Click Save.

   File:9999999999l.jpg